Emitec Technologies GmbH
Hauptstraße 128,
53797 Lohmar, Germany
Phone: +49 2246 109 0
contact.emitec(at)emitec.com
METALIT® –
MX-Design®
Metal substrate (METALIT®) with Mixing Structure (MX-Design®) for catalytic converter.
Facts and Benefits
- Shovels and perforation assure droplets will hit catalytic wall and evaporate rather than pass through
- Reduces / eliminates risk of deposit formation downstream of the substrate
- Enables significantly increased reductant injection amounts, especially in low load / low temperature operation
- MX with hydrolysis coating improves urea conversion to ammonia for SCR-reaction
Technical Information
- Application as evaporator and hydrolysis catalyst for injected reductant in SCR applications
- Low cell density shovel corrugation combined with perforated flat foils
- Cell density 40 cpsi
- Foil thickness 65 µm (2,6 mil)
Metal substrate (METALIT®) with Mixing Structure (MX-Design®) for catalytic converter.
Facts & Benefits
- Shovels and perforation assure droplets will hit catalytic wall and evaporate rather than pass through
- Reduces / eliminates risk of deposit formation downstream of the substrate
- Enables significantly increased reductant injection amounts, especially in low load / low temperature operation
- MX with hydrolysis coating improves urea conversion to ammonia for SCR-reaction
Technical Information
- Application as evaporator and hydrolysis catalyst for injected reductant in SCR applications
- Low cell density shovel corrugation combined with perforated flat foils
- Cell density 40 cpsi
- Foil thickness 65 µm (2,6 mil)
Further Substrates and Foil Designs
Further Substrates and Foil Designs
METALIT® with Asymmetrical Contour
METALIT® – with thin wall Mantle
METALIT® – without Mantle