Emitec Technologies GmbH
Hauptstraße 128,
53797 Lohmar, Germany
Phone: +49 2246 109 0
contact.emitec(at)emitec.com
TESTING CAPABILITIES
Emitec Technologies Testcenter
Internal / External Testing Opportunities
Four-wheel chassis dynamometer – PC / LD applications
- 153 -258 kW, max. 250 km/h
- Climatic chamber: -20 ° C up to + 35 ° C (adjustable)
- Fully equipped with exhaust gas measurement technique following worldwide certification regulations
LD Engine Test Benches
- 3 x 230 kW and 2 x 400 kW
- 2 benches in climatic chamber ( -20° – 35°C)
- Emission measurement system for Diesel and Gasoline
Four-wheel chassis dynamometer – HD vehicles applications
- 450 – 600 kW, max. 160 km/h
- Fully equipped with exhaust gas measurement technique
- Standard and customized test cycles
Dynamic engine test beds – HD vehicles applications
- 1 x 400 kW, max 2500 Nm, 5000 rpm and 1 x 600 kW, max. 4000 Nm, 4000 rpm
- Ready for fully automated operation
- Fully equipped with exhaust gas measurement technique
- Fuel supply – tank system with 7 tanks (7 different fuel types possible)
Emitec Technologies Test Center
Internal / External Testing Opportunities
Four-wheel chassis dynamometer – PC / LD applications
- 153 -258 kW, max. 250 km/h
- Climatic chamber: -20 ° C up to + 35 ° C (adjustable)
- Fully equipped with exhaust gas measurement technique following worldwide certification regulations
LD Engine Test Benches
- 3 x 230 kW and 2 x 400 kW
- 2 benches in climatic chamber ( -20° – 35°C)
- Emission measurement system for Diesel and Gasoline
Four-wheel chassis dynamometer – HD vehicles applications
- 450 – 600 kW, max. 160 km/h
- Fully equipped with exhaust gas measurement technique
- Standard and customized test cycles
Dynamic engine test beds – HD vehicles applications
- 1 x 400 kW, max 2500 Nm, 5000 rpm and 1 x 600 kW, max. 4000 Nm, 4000 rpm
- Ready for fully automated operation
- Fully equipped with exhaust gas measurement technique
- Fuel supply – tank system with 7 tanks (7 different fuel types possible)
Flow Benches
Flow distribution measurement:
- Three axis measurement with hot wire anemometer at constant Reynolds number
- Air volume flow up to max. 3000 Nm³/h (depending on the setup)
- Setup: catalyst substrates with or without manifolds, turbocharge
Backpressure measurement:
- Air volume flow up to max. 2000 Nm³/h (depending on the setup)
- Air stream heater for constant temperature at 100 °C
- Setup: catalyst substrate or complete aftertreatment system
Hot Shake Test Benches
Burners:
- Power 200 kW / 400 kW
- Gas mass flow from 100 up to 1.500 kg/h
- max. temperature up to 1.200 °C
- min. temperature down to 80 °C
- positive temperature transient: 24.000 K/min (depending on the test sample)
- negative temperature transient: -12.000 K/min (depending on the test sample)
Shakers:
- max. force vector: 35 kN / 54 kN
- max. excitation frequency up to 3.000 Hz
- min. excitation frequency down to 10 Hz
- vibration amplitude: +/- 12 mm
Do you have specific questions or would like to get in touch with our test center?
Please contact:
Emitec Technologies GmbH
Test Center
Industriestraße 2
99820 Hörselberg-Hainich
Phone: +49 (0)36920 71 418